26
Electrical installation
3ADW000379R0501 DCS550 Manual e e
EMC filters
Further information
is available in the
Technical Guide.
The paragraphs below describe selection of the
electrical components in conformity with the
EMC Guideline. The aim of the EMC Guideline
is, as the name implies, to achieve
electromagnetic compatibility with other
products and systems. The guideline ensures
that the emissions from the product concerned
are so low that they do not impair another
product's interference immunity.
In the context of the EMC Guideline, two
aspects must be borne in mind:
− the product's interference immunity and
the product's actual emissions.
The EMC Guideline expects EMC to be taken into
account when developing a product; however,
EMC cannot be designed in, it can only be
quantitatively measured.
Notes on EMC conformity:
The conformity procedure is the responsibility of
both the power converter's supplier and the
manufacturer of the machine or system
concerned, in proportion to their share in
expanding the electrical equipment involved.
First environment (residential area with light industry) with PDS category C2
Not applied, since category C1 (general distribution sales channel) excluded
To Next Page
Loading...
