6.3.3 Install the charge post on the foundation......................................................... 41
6.3.4 Install the cable gland plates................................................................................42
7 Electrical installation of the power cabinet...................................43
7.1 General procedure...................................................................................................................43
7.2 Connect the PE cables to the power cabinet.....................................................................44
7.3 Connect the AC input cable...................................................................................................44
7.4 Connect the DC power cables...............................................................................................45
7.5 Connect the AC auxiliary power cable in the primary power cabinet...........................46
7.6 Connect the interlock and DC guard cables.......................................................................47
7.6.1 Connect the interlock and DC guard cables to the primary power
cabinet.......................................................................................................................47
7.6.2 Connect the interlock and DC guard cables to the secondary power
cabinet...................................................................................................................... 48
7.7 Connect the CAN cables.........................................................................................................49
7.7.1 Connect the optical CAN cables between the charge post and the
primary power cabinet.......................................................................................... 49
7.7.2 Connect the analog CAN cables between the primary and secondary
power cabinet..........................................................................................................50
7.8 Connect the control cable for the tilt sensors to the primary power cabinet
(option)......................................................................................................................................52
7.9 Connect the control cable for the tilt sensors to the secondary power cabinet
(option)......................................................................................................................................53
8 Electrical installation of the charge post.......................................55
8.1 General procedure...................................................................................................................55
8.2 Connect the PE wire................................................................................................................55
8.3 Connect the DC power input cables....................................................................................56
8.4 Connect the AC auxiliary power cable................................................................................. 57
8.5 Connect the interlock and DC guard cable.........................................................................58
8.6 Connect the optical CAN cable............................................................................................. 59
8.7 Connect the Ethernet cable.................................................................................................. 60
8.8 Connect the control cable for the tilt sensors from the external customer
interface to the charge post (option)..................................................................................61
9 Prepare for commissioning..............................................................62
10 Access to parts.................................................................................. 63
10.1 Open the door of the power cabinet................................................................................... 63
10.2 Remove the plinth covers of the power cabinet............................................................... 63
10.3 Remove the DC busbar cover................................................................................................64
10.4 Remove the AC covers............................................................................................................64
Contents
9AKK107992A6488-EN | 004 5
To Next Page
Loading...
