ABB IRB 4600 Foundry Prime - Page 154

Current design:
A
B
C
xx1000000669
Oil draining plug gearbox 1A
Oil filling and venting plug for gearbox 1B
Surface for motor flangeC
Required equipment
NoteEquipment
3HAC029646-001Oil plug sealing washer, gearbox
See section Type of lubrication in gearboxes
on page 151.
Lubricating oil
The capacity of the vessel must be sufficient
to take the complete amount of oil.
Oil collecting vessel
One example of oil dispenser can be found
in section:
• Type of lubrication in gearboxes on
page 151
Oil dispenser
Content is defined in section Standard tools
on page 393.
Standard toolkit
Additional equipment - Foundry Prime
NoteArt. no.Equipment
Mercasol3HAC034903-001Rust preventive
Continues on next page
154 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.5.2 Changing the oil, axis 1 gearbox on floor mounted robots
Continued