NoteAction
Disconnect connectors on the brake release
unit:
• X8
• X9
• X10
6
xx0900000099
Cut the cable straps securing the battery
cable.
7
Parts:
• A: Cable straps (2 pcs)
Disconnect the battery cable.8
xx1200000889
A Thin nut, width 30 mm
B R1.SMB
C Bracket
D Air connector
Unscrew the thin nut securing the R1.SMB
connector on the outside of the bracket.
Tip
Use a deep well hexagon socket, width 30
mm (like the ones used for spark plugs, or
similar).
xx1200000888
9
Unscrew the nut for the air connection on
the inside of the bracket.
10
Continues on next page
Product manual - IRB 4600 Foundry Prime 209
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
4 Repair
4.3.1 Removing the complete cable harness
Continued
To Next Page
Loading...
