NoteAction
xx0800000338
Using caution, push the cable package
through the hole where the cable bracket
will be fitted.
11
Parts:
• A: Signal lamp
• B: Bracket
• C: Cable bracket
Refit the air hose to the elbow fitting.12
Refit the cable bracket with its attachment
screws.
13
How to connect motor cables is detailed
in sections:
• Refitting motors on page 314
Reconnect all motor cables.14
xx0800000335
Refit the bracket on the tubular shaft unit.15
Parts:
• A: Tubular shaft unit
• B: Attachment screws M6x16 qual-
ity 8.8-A2F (2 pcs)
• C: Bracket
Refit the signal lamp, if used.16
Seal and paint the joints that have been
opened. Also repair possible damages of
the special Foundry Prime paint coat of the
robot. See Cut the paint or surface on the
robot before replacing parts on page 201.
17
Continues on next page
Product manual - IRB 4600 Foundry Prime 275
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
4 Repair
4.4.1 Replacing the complete upper arm
Continued
To Next Page
Loading...
