ABB IRB 4600 Foundry Prime - Page 396

NoteArt. no.Description
Valid for types B and C3HAC048502-001Turning tool (includes lifting instruction
3HAC051688-001)
Lifting accessories
This table specifies the lifting accessories required during several of the service
procedures. The lifting accessories can be ordered separately and are also specified
directly in concerned instructions.
NoteArticle no.QtyDescription
Lifting accessory, axis 2
Lifting accessory, axis 3
For lifting of upper arm.-2 pcsRotating lifting point
Dimension: M8.
Example: Gunnebo RLP
GrabiQ M8-10.
xx1100000564
Special tools
This table specifies the special tools required during several of the service
procedures. The tools are specified directly in concerned instructions.
Article no.QtyDescription
3HACxxx1Guide for reduction gear
Used to guide axis-1 gear and frame
during refitting.
396 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
7 Reference information
7.7 Special tools
Continued