ABB IRB 6640 Foundry Prime - Page 324

NoteAction
For art. no. see:
• Additional equipment - Foundry
Prime on page 314
xx1000000559
Apply rust preventive (Mercasol) on the
front shaft.
19
• A: Mercasol
For art. no. see:
• Required equipment - tools etc. on
page 313
Described in section Dismounting and
mounting tool 3HAC028920-001 on page 469.
xx0900000080
Refit the front shaft using the dismantle
and mounting tool.
Note
• Apply rust preventive (Mercasol)
on the shaft.
20
• A: Protection plug
• B: Hex socket head cap screw
M16x70
• C: Washer
• D: Shaft
• E: Press tool or Distance tool
Tightening torque: 200 Nm.Refit the hex socket head cap screw
M16x70 quality 8.8 steel.
21
Use Loctite 2701.
Method 1: Described in section Restoring
the balancing device using a hydraulic press
tool on page 336
Restore the balancing device in one of the
methods.
22
Method 2: Described in section Restoring
the balancing device using distance tool on
page 331.
Continues on next page
324 Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.5.4.2 Replacing balancing device (design 2)
Continued