ABB IRBT 2005 User Manual

3.5.2 Inspecting the felt gear
Location of felt gear
The felt gear is located as shown in figure.
xx1400002641
GearboxA
Felt gearB
Required equipment
NoteArt. No.Equipment
Content is defined in section Standard tools on page 276.-Standard toolkit
Inspecting the felt gear
Illustration/NoteAction
Inspect the felt gear.1
If damaged, replace it. See Replacing the felt gear on
page 233.
168 Product manual - IRBT 2005
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
3 Maintenance
3.5.2 Inspecting the felt gear

ABB IRBT 2005 Specifications

General

Brand	ABB
Model	IRBT 2005
Category	Robotics
Language	English