3.3.2 Cleaning the linear guides
Location of linear guides
The linear guides are located as shown in figure.
xx1400000466
linear guidesA
Required equipment
When you clean the linear guides, it is necessary to lubricate them manually. Use
one of the recommended lubricants:
NoteEquipment
KLÜBER Microlube GB0Lubricant
TOTAL Multis EP 0Lubricant
Lint free cloth
Continues on next page
Product manual - IRBT 2005 157
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
3 Maintenance
3.3.2 Cleaning the linear guides
To Next Page
Loading...
