ABB IRBT 2005 User Manual

4.11 Cut the paint or surface on the robot before replacing parts
General
Follow the procedures in this section whenever breaking the paint of the robot
during replacement of parts.
Required equipment
NoteSpare partsEquipment
EthanolCleaning agent
Knife
Lint free cloth
Removing
DescriptionAction
xx0900000121
Cut the paint with a knife in the joint between
the part that will be removed and the struc-
ture, to avoid that the paint cracks.
1
Carefully grind the paint edge that is left on
the structure to a smooth surface.
2
262 Product manual - IRBT 2005
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
4 Repair
4.11 Cut the paint or surface on the robot before replacing parts

ABB IRBT 2005 Specifications

General

Brand	ABB
Model	IRBT 2005
Category	Robotics
Language	English