ABB IRBT 2005 - Replacing the Ball Bearing Blocks

4.3 Replacing the ball bearing blocks
Location of ball bearing blocks
The figure below shows the location of the ball bearing blocks and other key parts:
xx1400000459
NameItem
Ball bearing blocksA
Carriage bracketB
linear guideC
Mechanical stopD
End coverE
Required equipment
NoteEquipment
Spare part number is specified in Spare parts on
page 283.
Ball bearings block
The content is defined in Standard tools on page 276.Standard toolkit
Jack > 2t
These procedures include references to the tools re-
quired.
Other tools and procedures may be
required. See references to these
procedures in the step-by-step in-
structions below.
Continues on next page
182 Product manual - IRBT 2005
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
4 Repair
4.3 Replacing the ball bearing blocks