InformationAction
xx0200000023
2
WARNING
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the section
The unit is sensitive to ESD on page 29
Open the cover on the SMB box.
CAUTION
Clean cover from metal residues before opening.
Metal residues can cause shortage on the boards
which can result in hazardous failures.
3
Pull out the battery and disconnect the battery
cable.
4
Fit the new battery and connect the battery cable.5
Close the SMB box.6
See Calibration on page 263.Update the revolution counters.7
See Environmental information on
page 267.
Dispose of the old battery.8
176 Product manual - IRBT 2005
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
3 Maintenance
3.7.1 Replacing SMB battery
Continued
To Next Page
Loading...
