Extra plate
The figure below shows the dimensions of the extra plate in mm.
xx1400000462
Robot pedestal
The robot pedestal is designed to fix the robot.
The pedestal has two height models, 250 mm and 500 mm. Users can choose the
suitable pedestal/pedestal combination to meet their requirements. The following
height models can be provided by the pedestal/pedestal combination: 250 mm,
500 mm, 750 mm and 1000 mm.
Note
500mm, 750 mm and 1000 mm risers are not applicable to IRB 4600.
Product manual - IRBT 2005 77
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.6 Measures of the carriage table
Continued
To Next Page
Loading...
