Hole configuration
The stands have leveling screws for adjusting the level of the track.
xx1400000649
NoteArt. No.Art.Item
Leveling screw3HAW108201422Lifting threaded block
M60x2,00
A
Fitting nut3HAWC100857Slotted nut KM12 for
leveling screw
B
Stand--C
Screws for fastening track to base
Recommended screws for fastening the
track to the base
M16x125 mmSteel structure
M16x125 mm
i
Concrete floor
i
The type and dimension of screws depend on the foundation conditions. See description for
maximum floor loads in Operating environment.
Product manual - IRBT 2005 81
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.4.3 Hole configuration
Continued
To Next Page
Loading...
