Illustration/NoteAction
xx1400001828
A M6x12 Screw DIN6921,
9ADA181-11 (7 pcs)
Tightening torque: 10 Nm
B End cover of the track
Fit the top screw of the end covers if this option
is ordered.
5
Release the carriage brake again and push the
carriage manually along the length of its stroke.
Verify that no covers come into contact with
the moving carriage.
6
Product manual - IRBT 2005 91
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.4.5 Assembling the sections of the track motion IRBT 2005 (Longer than 9 m)
Continued
To Next Page
Loading...
