Illustration/NoteAction
xx1400000584
Remove the dust after brushing the hole
with a vacuum cleaner.
3
xx1400000585
Introduce a glass capsule in the hole after
verifying that the liquid inside the capsule
is fluid.
4
Insert the HILTI tool supplied with the an-
chor kit in the chuck of a handheld electric
punch drill.
5
Insert the triangular extremity of the
threaded rod in the HILTI tool.
Continues on next page
94 Product manual - IRBT 2005
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.4.6 Positioning the stand
Continued
To Next Page
Loading...
