Settings
Table 273: GATE Group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Disabled Operation Disabled/Enabled
11.3.1.6 Exclusive OR function block XOR
Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Exclusive OR function block XOR - -
Functionality
The exclusive OR function (XOR) is used to generate combinatory expressions with
boolean variables. XOR has two inputs and two outputs. One of the outputs is inverted.
The output signal is 1 if the input signals are different and 0 if they are the same.
Function block
XOR
INPUT1
INPUT2
OUT
NOUT
IEC09000292-1-en.vsd
IEC09000292 V1 EN
Figure 171: XOR function block
Signals
Table 274: XOR Input signals
Name
Type Default Description
INPUT1 BOOLEAN 0 Input signal 1
INPUT2 BOOLEAN 0 Input signal 2
Table 275: XOR Output signals
Name
Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
Section 11 1MRK 511 287-UUS A
Logic
378
Technical manual
To Next Page
Loading...
