11.3.2.12 Indication extractor single position function block INDEXTSPQT
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Single indication signal extractor
function block
INDEXTSPQT - -
Functionality
Value part of single position input is copied to SI_OUT output.
Time part of single position input is copied to TIME output.
State bits in common part and indication part of inputs signal is copied to the
corresponding state output.
Function block
INDEXTSPQT
SI_IN* SI_OUT
TIME
BLOCKED
SUBST
INVALID
TEST
IEC09000307-1-en.vsd
IEC09000307 V1 EN
Figure 189: INDEXTSPQT function block
Signals
Table 317: INDEXTSPQT Input signals
Name
Type Default Description
SI_IN BOOLEAN 0 SI_OUT
Table 318: INDEXTSPQT Output signals
Name
Type Description
SI_OUT BOOLEAN SI_OUT
TIME GROUP SIGNAL Timestamp of input
BLOCKED BOOLEAN SP_OUT
SUBST BOOLEAN Substituted
INVALID BOOLEAN SP_OUT
TEST BOOLEAN SP_OUT
Section 11 1MRK 511 287-UUS A
Logic
398
Technical manual
To Next Page
Loading...
