5: Monitoring & Filtering
VLAN1 ethertype
Allows selecting the ethertype of the first tag inserted in the tunneled frame. This is available only when the Tunneling
operation mode is selected.
VLAN2 ethertype
Allows selecting the ethertype of the second tag inserted in the tunneled frame (for Q-in-Q). This is available only when
the Tunneling operation mode is selected.
VLAN ID
This specifies which VLAN tags to insert in the forwarded frames. The VLAN ID field is available only when the
Forwarding operation mode is selected.
VLAN list
This specifies which VLAN tags to insert in the tunneled frames. The format is a list of comma-separated groups formatted
as vlan1:vlan2. The second tag (Q-in-Q) entry is optional. For example, if we wanted to single-tag tunneled frames with
VLAN ID 3, and double-tag frames with VLAN IDs 5-6 and 22-88, we would specify: 3, 5:6, 22:88.
Note that the frames are duplicated for each entry in the VLAN list. In the example above, 3 frames would egress the
network port for each ingressing frame, matching the rule, on the client port.
Also note that there should be at least one entry in the list, as tunneling untagged frames is currently not supported.
The VLAN list is available only when the Tunneling operation mode is selected.
To Next Page
Loading...
