Accedian EtherNID EE - Alarms; 13 Appendix A - Alarms

13: Appendix A - Alarms
13 Appendix A - Alarms
C
Alarms
NOTE: Once an alarm has been raised (depending on the description of the alarm), the alarm will only be cleared once
the fault has been corrected and the alarm threshold off soaking period has expired.
The following alarms are supported:
Port module for link down and others related alarms.
1.001.01 -> link down on Management port
1.002.01 -> link down on Monitor-1 port
1.003.01 -> link down on Monitor-2 port
1.004.01 -> link down on Client port
1.005.01 -> link down on Network port
1.004.02 -> loopback on port Client
1.005.02 -> loopback on port Network
SFP module for Rx/Tx power, temp, vcc and lbc alarms and warnings.
2.001.01 -> SFP-A temperature high alarm
2.001.02 -> SFP-A temperature low alarm
2.001.03 -> SFP-A temperature high warning
2.001.04 -> SFP-A temperature low warning
2.001.05 -> SFP-A supply voltage high alarm
2.001.06 -> SFP-A supply voltage low alarm
2.001.07 -> SFP-A supply voltage high warning
2.001.08 -> SFP-A supply voltage low warning
2.001.09 -> SFP-A laser bias current high alarm
2.001.10 -> SFP-A laser bias current low alarm
2.001.11 -> SFP-A laser bias current high warning
2.001.12 -> SFP-A laser bias current low warning
2.001.13 -> SFP-A transmit power high alarm
2.001.14 -> SFP-A transmit power low alarm
2.001.15 -> SFP-A transmit power high warning