9: Performance Assurance Agent
PAA results
To view the results of all PAA probes, open the PAA > Results page.
This page provides a summary of the results of PAA probes.
Index
Probe's unique identifier.
Probe Name
Probe's name as defined in the configuration page. Click this name for more details.
State
Indicates the probe's current state. Possible values are:
• Disabled : Disabled by configuration.
• Associating : Enabled looking for peer.
• Associated : Enabled peer found.
• Running : Running one time measurement.
• Idle : Idle after one time measurement completed.
• Locked IS : Locked traffic in service.
• Locked OOS : Locked traffic out of service.
Results Codes definition
• PL : Packet Loss ratio
• OAD : One-way Average Delay
• OADV : One-way Average Delay Variation
• TAD : Two-way Average Delay
• TADV : Two-way Average Delay Variation
To Next Page
Loading...
