Accedian EtherNID EE - Configuring RFC-2544 Generator

8: RFC-2544
Configuring RFC-2544 Generator
To edit the RFC-2544 Packet header settings, select First header packet settings show details button of the flow to be
edited.
1
.
Type
Layer-2 or Layer-3.
Layer-2 settings
Port name
Name configured for the port on which to send the flow(s).
MAC destination
This is the peer MAC address.
Y.1731 MEG level
The maintenance Entity Group level.
Layer-3 settings
Destination IP address
The IP address of the remote side.
DSCP
The DiffServ Code Point to set in the generated packets.
UDP port settings (Source & Destination)
Specify the UDP port numbers used to generate the UDP packet.