8: RFC-2544
Enable VLAN 1 header
This is to encapsulate all packets with 1 VLAN header.
VLAN 1 ID
First VLAN ID. When enabled, all test packets are encapsulated into the specified VLAN ID.
VLAN 1 Ethernet type
First VLAN Ethernet type. Applies only when VLAN 1 header is enabled.
VLAN 1 Priority
First VLAN priority bits. Applies only when VLAN 1 header is enabled.
VLAN 1 CFI
First VLAN canonical format indicator (CFI). Applies only when VLAN 1 header is enabled.
Enable VLAN 2 header
This is to encapsulate all packets with 2 VLAN headers. (.1Q in .1Q)
VLAN 2 ID
Second VLAN ID. When enabled, all test packets are encapsulated into the second specified VLAN ID. Applies only when
VLAN 1 header is enabled.
VLAN 2 Ethernet type
Second VLAN Ethernet type. Applies only when VLAN 2 header is enabled.
VLAN 2 Priority
Second VLAN priority bits. Applies only when VLAN 2 header is enabled.
VLAN 2 CFI
Second VLAN canonical format indicator (CFI). Applies only when VLAN 2 header is enabled.
To Next Page
Loading...
