8: RFC-2544
: Error! Reference source not found.
8 RFC-2544
C
RFC-2544 Generator
NOTE: The RFC-2544 feature is only available on the EtherNID GE and MetroNID TE / TE-R / TE-S models.
Viewing RFC-2544 Generator
To view the RFC-2544 generator configuration, open the RFC-2544 > Generator > Configuration page.
To edit any existing settings, click the flow profile setting.
Test Description
Description configured to identify the test and its characteristics.
Outgoing port
Name configured for the port out which to send the flow(s).
Enable flows
Checkboxes to specify the flow(s) included in the test.
To Next Page
Loading...
