9: Performance Assurance Agent
z Associating: Enabled looking for peer.
z Associated: Enabled peer found.
z Running: Running one time measurement.
z Idle: Idle after one time measurement completed.
z Locked IS: Locked traffic in service.
z Locked OOS: Locked traffic out of service.
z Destination: For layer-2 probes this is the peer’s MAC address. For UDP probe this is the peer’s IPV4 address.
z Sampling period: Interval at which PAA issues PAA measurement packets.
Configuring a probe
1. Open the PAA > Configuration page.
2. Click Add to create a new probe or click the probe name to edit an existing probe.
To Next Page
Loading...
