2: Hardware Installation
Front panel
The front panel features different ports and status lights depending on the model.
Ethernet ports
All Ethernet ports are 10/100/1000BaseT or 10/100BaseT Ethernet, depending on the model, supporting auto-negotiation,
auto-MDIX and have RJ-45 connectors.
Each port has two indicator lights as follows:
Light Solid Flashing
Link/RX Port is connected at the link layer. Port is receiving data.
TX N/A Port is transmitting data
SFP ports
All SFP ports are compliant with INF-8074 and must be connected to SFP modules that are class 1 lasers and are
compliant with IEC825-1.
Port functionality
The following table lists the capabilities of each port.
Model SFP RJ-45
EE N/A
10Base-THD/TFD
100Base-TX/TXHD/TXFD
(Auto-negotiation/Auto MDIX)
To Next Page
Loading...
