12: Command Line Interface
12 Command Line
Interface
C
Command summary
Note: For a list of all CLI command descriptions, use the help command in the CLI.
The CLI provides the following commands.
Ethernet port commands
z cable-test: Perform time domain reflectometry diagnostics.
z fault-propagation: Manage the link fault propagation between ports.
z lacp: Manage the link aggregation group configuration.
z media-selection: Select the ports' media type.
z port: Manage the link and physical level port settings.
z sfp: Display the SFP information, including digital diagnostics.
User traffic/flow through commands
z bandwidth-regulator: Manage bandwidth regulator database.
z cos-profile: Manage class of service profiles for service mapping.
z l2pt: Manage the Layer-2 Protocol Tunneling rules.
z filter: Manage the filter database.
z forwarding: Manage user traffic encapsulation.
z policy: Manage policy entries applied on ports.
z regulator-set: Manage bandwidth regulator sets for service mapping.
z traffic-shaping: Manage Traffic shapers database
System management commands
z certificate: Manage the SSL certificates.
z console: Manage the serial (RS-232) console port.
z echoagent: Manage the Creanord’s EchoVault agent configuration.
z date: Print or set the system date and time.
z dns: Manage the DNS settings.
z interface: Manage the interfaces used to access the management plane.
z mode: Define the general system settings.
To Next Page
Loading...