12: Command Line Interface
z motd: Manage the MOTD of the unit.
z mtr: Manage management traffic regulation settings.
z ntp: Manage the network time client and server functions.
z permission-group: Manage the user privilege profiles.
z radius: Manage RADIUS authentication methods.
z route: Manage the IP routes and gateways.
z session: Manage the session settings or active sessions.
z snmp: Manage the SNMP agent settings.
z syslog: Manage the remote syslog settings.
z user: Manage user account settings including privilege profile.
OAM commands
z alarm: Manage the alarm settings.
z cfm: Manage the SOAM CFM feature
z loopback: Manage the loopback settings associated with an OAM instance.
z oam: Manage the OAM instances (802.3ah).
z paa: Manage the Performance Assurance Agent instances.
Utilities
z configuration: Export, import or factory reset the device configuration.
z firmware: Install a new firmware or display current firmware version.
z ping: Send pings to a specified host.
z reboot: Restart the device, equivalent to a power up boot.
z rfc2544: Run in-service and out-of-service packet generator and RFC-2544 tests.
z statistics: Clear all statistics. (port,policies,regulators,OAM)
z tcp-connect: Tries to connect to a TCP port to verify if a service is reachable.
z traceroute: Display the hops used to reach a given host.
Miscellaneous commands
z board: Manage assembly and environmental information.
z exit: Terminate the current CLI session.
z help <command-name>: Display this help or for a specific given command.
z quit: Terminate the current CLI session.
z syntax: Display the general command syntax.
z version: Display cli version.
To Next Page
Loading...
