8: RFC-2544
To edit the RFC-2544 Flows , select flow settings show details button of the flow to be edited.
Flow type
The type of flow testing being done. Either In-service (sharing a traffic regulator with client traffic) or Out-of-service (using
the full link bandwidth).
Regulator
Regulator to use when In-service flow type is selected. When Out-of-service flow type is selected, this field has no effect.
Flow name
Unique name assigned to the flow.
Flow description
Description to identify the flow and its characteristics.
Traffic type
Select between burst or constant rate traffic.
z Constant: The constant traffic type consists of sending packets at a specific bit rate (Kbps).
z Burst: The burst traffic type consist of sending a configured number of packets at every period. The period is
a number of milli-seconds between each burst of packets.
Size type
Select between fixed or random size. The fixed configuration requires a packet Size to be specified. The random
configuration requires a Minimum size value and a Maximum size value to be specified.
To Next Page
Loading...
