9: Performance Assurance Agent
• Disabled: This probe is disabled. To enable it, click the probe name and then select the Enable PAA probe
checkbox.
• Associating: Probe is looking for peer.
• Associated: Peer was found.
• Running: Running one time measurement.
• Idle: Idle after one time measurement completed.
• Locked IS: Locked traffic in service.
Period: Interval at which measurement packets were issued.
Packet loss
This section provides Packet loss statistics, the amount of gaps in the sequence number and the maximum gap size.
One-way delay variation
Two-way delay variation
• Instantaneous DV: Instantaneous delay variation value in microseconds.
• Minimum DV: Minimum delay variation in microseconds over one period.
• Maximum DV: Maximum delay variation in microseconds over one period.
• Average DV: Average delay variation in microseconds over one period.
• Nbr threshold exceeded: Number of times the threshold was exceeded.
One-way delay
Two-way delay
• Instantaneous delay: Instantaneous delay value in microseconds.
• Minimum delay: Minimum delay microseconds over one period.
• Maximum delay: Maximum delay microseconds over one period.
• Average delay: Average delay in microseconds over one period.
• Nbr threshold exceeded: Number of times the threshold was exceeded.
To Next Page
Loading...
