AGFA DR 400 - Page 5

Rotating the bucky ................................................. 167
Loading of the bucky in the Radiographic Table ..... 168
Loading of the bucky in the Radiographic Wall Stand ...
169
Unloading of the bucky in the Radiographic Table ..170
Unloading of the bucky in the Radiographic Wall Stand
....................................................................................171
Automatic Cassette Size Sensing ............................ 172
Centering and collimating ......................................173
Bucky types ............................................................175
Cassette and detector formats ................................ 177
Standard cassette formats ...................................... 178
DR Detector formats and orientation ......................179
Orientation of DR 10s in the bucky .............180
Orientation of DR 14s in the bucky ............. 181
Orientation of DX-D 10C, DX-D 10G in the bucky
........................................................................183
Using DX-D 45C, DX-D 45G, XD 10, XD⁺10 only
outside the bucky .......................................184
Grids ......................................................................185
Anti-scatter grids ....................................... 186
Grid focal distance color indication ............ 187
Grid detection ............................................188
Storage box for DR Detector and grids ........189
Automatic Exposure Control (AEC) ........................190
X-Ray Generator Mini Console ........................................... 191
Starting and stopping the generator ....................... 192
X-ray tube start-up modes ...................................... 193
X-ray generator messages and warning signals ....... 194
X-ray generator errors ................................ 196
Error numbers ............................................197
Exposure parameters ............................................. 202
Problem solving .................................................................205
Restoring connection between generator and NX after
generator failure ....................................................206
Automatic collimation always too wide or too narrow ..
207
Empty Bucky Failure, Double Exposure Failure ...... 208
NX does not connect to the generator due to ID tablet ..
209
No table movement ................................................ 210
DR Detector is Exceeding the Maximum Working
Temperature .......................................................... 211
DR Detector must be Recalibrated .......................... 212
System does not start completely if collimator is in manual
mode ..................................................................... 213
Tube head display shows screen to check network
connection ............................................................. 214
Radiographic Parameter Limits .............................. 215
Product Information ...........................................................216
DR 400 | Contents |
v
3231E EN 20210708 1530