2
Agilent 7820 GC Service
Notices
© Agilent Technologies, Inc. 2012
No part of this manual may be reproduced in any form or by any
means (including electronic storage and retrieval or
translation into a foreign language) without prior agreement
and written consent from Agilent Technologies, Inc. as
governed by United States and international copyright laws.
Manual Part Number
G4350-90018
Edition
Third edition, August 2012
Printed in China
Agilent Technologies (Shanghai) Co., Ltd.
412 Ying Lun Road
Waigaoqiao Free Trade Zone
Shanghai 200131 P.R.China
Warranty
The material contained in this document is provided “as is, ”
and is subject to being changed, without notice, in future
editions. Further, to the maximum extent permitted by
applicable law, Agilent disclaims all warranties, either
express or implied, with regard to this manual and any
information contained herein, including but not limited to the
implied warranties of merchantability and fitness for a
particular purpose. Agilent shall not be liable for errors or
for incidental or consequential damages in connection with the
furnishing, use, or performance of this document or of any
information contained herein. Should Agilent and the user have
a separate written agreement with warranty terms covering the
material in this document that conflict with these terms, the
warranty terms in the separate agreement shall control.
Safety Notices
A warning calls attention to a condition or
possible situation that could cause injury to
the user.