Agilent Technologies 7820A Service Manual

Agilent 7820 GC Service
149
Typical values
The following are typical values for the detector results. The
results for a detector depend on site preparation related factors.
These are not pass/fail criteria.
Agilent ChemStation
Noise ([N3])
Measured by ChemStation, ASTM [N3]
4 Hz
Signal
Area, Lindane peak
6700
3396B or 3396C or 3397A integrator sample conditions with
analog input [GC Analog output, Range 0]
>>Set DATE and TIME<<
GC Analog output
Noise ([N1])
Measured at [GC Range 0],
[3396 Attn. 3, Chart speed 1, zero
50]
40 mm (for 1 min measurement)
Signal
GC Range 6
3396
Zero
10
Pk wd
0.04
Att 2^
5
Thresh
5
Cht sp
1
Stop time
11.0
Ar Rej
100000
Area, Lindane peak
43000

Agilent Technologies 7820A Specifications

General

Brand	Agilent Technologies
Model	7820A
Category	Laboratory Equipment
Language	English