Agilent 7820 GC Service
265
Oven shroud
There are two different oven shrouds depending on the power
option used. The oven shroud contains the oven heater and
sensor as part of the assembly. If you need to replace the heater
or sensor, you should replace the entire shroud assembly. See
Replacing the oven shroud, oven fan, and oven fan motor (
205).
If you need to convert a GC's power option, see Power options
( 257).
For configuration information (how to set the jumpers on the AC
board for the voltage option), see Converting the power option
( 258).
Table 7. Part numbers for Oven Shrouds and
Power Options Kits