Agilent Technologies 7820A Service Manual

Agilent 7820 GC Service
99
The objective of this step is to separate the optics from the
transfer line. Do not flex the tubing where it is brazed to the
transfer line weldment.
Grasp the transfer line with your left hand and the optics
assembly with your right hand. Lift them just high enough so that
the 3 screws that you loosened in step 11 are above the bracket.

Agilent Technologies 7820A Specifications

General

Brand	Agilent Technologies
Model	7820A
Category	Laboratory Equipment
Language	English