Akai MPC User Manual

293
Insert Blank Bars: This lets you add empty bars to a Sequence at a
specified point, which you can set in the Insert Blank Bars window
that appears.
Click Do It to confirm your choice or Cancel to cancel the operation.
• Sequence: Click this drop-down menu and select the desired
Sequence.
• Number of Bars: Click and drag this field up or down to set
how many bars you want to add.
• Time Sig: Click and drag these fields up or down to set the desired time signature of the bars you
want to add.
• Before Bar: Click and drag this field up or down to set the bar of the Sequence before which you
want to add the blank bars.
Hardware: To add empty bars to a Sequence at a specified point:
1. Press Seq Edit to open the Edit Sequence window.
2. Press Pad 01 (Insert Blank Bars) to open the Insert Blank Bars window.
3. Use the Cursor Buttons to select the desired field and use the Data Dial or –/+ buttons to adjust
them.
• Sequence: Use this field to select the desired Sequence.
• Number of Bars: Use this field to set how many bars you want to add.
• Time Sig: Use these fields to set the desired time signature of the bars you want to add.
• Before Bar: Use this field to set the bar of the Sequence before which you want to add the blank bars.
4. Press F5 (Do It) to confirm your choice or F4 (Back) to cancel the operation.
(This function on your MPC hardware has existed in earlier releases but was not described in the earlier
User Guide.)
The Insert Blank Bars window in the MPC hardware display.

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired