Akai MPC User Manual

303
The Transpose window for a Drum Program The Transpose window for a Keygroup Program
in the MPC hardware display. in the MPC hardware display.
• Sequence: Use this field to select the desired Sequence.
• Track: Use this field to select the Track containing the desired Sequence.
• Time / To: Use these fields to set the time range (in bars: beats: ticks) of the events in the
desired Sequence.
• From Pad / To Pad (for Drum Programs): Use these fields to set the "source" pad (whose events
you want to move) and the "destination" pad (where the events will be placed). You can press the
desired pad when the field is selected.
• Range (for Keygroup Programs, MIDI Programs, and Plugin Programs): Use these fields to set the
range of notes of the events you want to transpose. Events within this note range will be
transposed while events outside of this range will remain unchanged.
• Transpose (for Keygroup Programs, MIDI Programs, and Plugin Programs): Use this field to set
how many semitones up or down you want to transpose the events.
4. Press F5 (Do It) to confirm your choice or F4 (Back) to cancel the operation.
(This function on your MPC hardware has existed in earlier releases but was not described in the earlier
User Guide.)

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired