304
Erase: This lets you erase all or part of a
Sequence on a specific Track, which you can set
in the Erase window that appears.
Click Do It to confirm your choice or Cancel to
cancel the operation.
• Sequence: Click this drop-down menu and
select the desired Sequence.
• Track: Click this drop-down menu and
select the Track containing the desired
Sequence.
• Time / To: Click and drag these fields up or down to set the time range (in bars: beats: ticks) of
the desired Sequence. Alternatively, double-click the field and type in a number.
• Erase: Click this drop-down menu and select one of these options:
o All erases all pad events from the designated time range and reset all of its settings.
o Note erases only specific pad events from the designated time range. In the diagram of the
eight pad banks that appears, click each pad to select or deselect its notes.
o Except Note erases everything except pad events from the designated time range.
Hardware: To erase the current Sequence:
1. Press Seq Edit to open the Edit Sequence window.
2. Press Pad 07 (Erase) to open the Erase window.
3. Use the Cursor Buttons to select the desired field and use the Data Dial or –/+ buttons to adjust
them. For numeric values, you can also use the numeric keypad to type in a value.
The Erase window in the MPC hardware display.
To Next Page
Loading...
Need help?
General
