Akai MPC User Manual

60
Hardware: To create a Plugin Program:
1. Press Main to enter Main Mode.
2. Use the Cursor Buttons to select the Pgm field, and then press the Window button.
3. In the Edit Program window that appears, press F3 (New) to create a new Program.
4. Use the Data Dial or -/+ buttons to select Plugin as the Type, and then press F5 (Do It) to confirm
or F4 (Cancel) to cancel.
5. Use the Cursor Buttons to select the Plg field.
6. Use the Data Dial or -/+ buttons to select the desired plugin, and then press F4 (Select) to confirm
or F3 (Back) to cancel.
7. To select the MIDI channel the Program will use, use the Cursor Buttons to select the Ch field, and
use the Data Dial or -/+ buttons to select one (from 1 to 16).
• To select a preset for your plugin (if any), use the Cursor Buttons to select the Plg field, and then
press the Window button. Use the Data Dial or -/+ buttons to select the desired preset, and then
press F5 (Select) to confirm or F4 (Close) to cancel. You can also press F2 (AutoSel) to load each
preset immediately as you select it.
Selecting the Plg field in the Main Mode of the MPC hardware display.
Preset selection for Plugin Programs in the MPC hardware display.

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired