74
The bar and tempo display shows the actual position in bars, beats, and ticks.
Hardware: To navigate to a particular position in a Sequence, you can use the
< / > buttons to move one step at a time within a bar, or use the << / >>
buttons to move one bar at a time. You can also press the Main button and
use the Cursor Buttons to move between the bars, beats, and ticks values in
the Now field (at the top of the display) and use the Data Dial or the -/+
buttons to change the value. You can also use the numeric buttons to enter a
desired value and confirm it by pressing Enter.
You can change the Sequence's tempo by double-clicking the BPM value and
entering a value with your computer keyboard. You can also click and drag the
BPM value up or down to increase or decrease it.
Hardware: Use the Tap Tempo button to tap in the beats per minute of your
desired tempo. An amber LED will blink, indicating the current beats. You can
also press the Main button and use the Cursor Buttons to move to the Bpm
parameter. Select the desired value by using the Data Dial or the -/+ buttons.
You can also use the numeric buttons to enter a value and confirm by pressing
Enter.
To Next Page
Loading...
Need help?
General
