68 Rockwell Automation Publication 750-UM006C-EN-P - March 2022
Chapter 4 Configure and Start Up the Drive
• If you want to use Integrated Safety over the network, the connection
type must be Standard and Safety.
• If you want to use Network-Integrated Safety Function (SSM) or
Network-Integrated Safety Function with Brake Control (S4), the
connection type must be Standard and Safety (20-750-S4).
4. To change the connection type, use the pull-down menu to select
another type. Click OK.
TIP For SSM and S4, continue reading.
To Next Page
Loading...
