Rockwell Automation Publication 750-UM006C-EN-P - March 2022 7
Preface
This publication provides basic information to install, connect, and maintain
the PowerFlex® 755 On-Machine™ drives.
For information on programming, troubleshooting, safety application
requirements, and EtherNet/IP networks, see the publications that are listed in
the Additional Resources
on page 8.
This manual is intended for qualified personnel. You must be able to program
and operate adjustable frequency AC drives. In addition, you must have an
understanding of the parameter settings and functions.
Summary of Changes
The following changes apply to this revision of the manual.
Conventions Used in This
Manual
These conventions are used throughout this manual:
• Where a parameter is referenced, it is referenced as Port#:Parameter#
[parameter name].
Example (00:301 [Net Addr Scr] or 10:350 - [Vref Source])
• Where groups of parameters are referenced, the Port# is stated in text
before the group.
• All Port#:Parameter# [parameter name] referenced are listed in bold.
For more information on parameters and their functions, see PowerFlex 750-
Series AC Drives Programming Manual, publication 750-PM001
.
ATTENTION: This manual is intended for qualified service personnel
responsible for installing and servicing these devices. You must have
previous experience and a basic understanding of electrical terminology,
configuration procedures, required equipment, and safety precautions.
Change See Page(s)
Added Bulletin 140MT Motor Protection Circuit Breakers to Drive Input Protection Devices Throughout
To Next Page
Loading...
Need help?
General
