Chapter 7: LAN1 and LAN2 Ports
102
Configuring the Management VLAN
Here are the guidelines to setting the management VLAN:
When the management VLAN is disabled, the default setting, the
access point handles untagged packets as members of VLAN 1.
When the management VLAN is enabled and set to VID 1, the
default VID, the access point accepts only tagged packets and
discards all untagged packets.
When Management VLAN Tag is enabled and Management VLAN
ID is a value other than 1, packets from wireless clients on VAPs
with the VID 1 are handled as untagged packets. This is also true
for packets from clients that are dynamically assigned the VID 1
from a RADIUS server.
Changing the management VLAN might end your management
session.
To configure the management VLAN, perform the following procedure:
1. Select Settings > LAN from the main menu. Refer to Figure 28.
Figure 28. LAN Settings Window
To Next Page
Loading...
