Allied Telesis AT-TQ5403 User Manual

31
Chapter 2
Basic Settings
This chapter contains the following procedures:
 “Assigning a Dynamic IP Address from a DHCP Server” on page 32
 “Assigning a Static IP Address to the Access Point” on page 35
 “Setting the Date and Time with the Network Time Protocol (NTP)” on
page 38
 “Manually Setting the Date and Time” on page 41
 “Configuring SNMPv1 and v2c” on page 43
 “Configuring SNMP Traps” on page 47
 “Enabling or Disabling the LEDs” on page 49
 “Enabling or Disabling the Reset Button” on page 50

Allied Telesis AT-TQ5403 Specifications

General

Brand	Allied Telesis
Model	AT-TQ5403
Category	Wireless Access Point
Language	English