AT-TQ5403 and AT-TQm5403 Access Points User’s Guide
33
Figure 4. Network DHCP Window
4. Configure the fields by referring to Table 2.
Table 2. Network DHCP Window
Parameter Description
Hostname Enter a hostname for the access point. Here
are the guidelines:
- The hostname can be from 1 to 63
alphanumeric characters.
- The hostname cannot contain spaces or
any special characters, except hyphens.
- The first or last character cannot be a
hyphen.
- The access point can have only one
hostname.
- The default is AT-TQ5403 or
AT-TQm5403.
- If you want the DHCP server to supply the
hostname, enable the Get Hostname from
DHCP Server option in this window.
Connection Type Select DHCP. This is the default. The Static
IP selection is explained in “Assigning a
Static IP Address to the Access Point” on
page 35.
To Next Page
Loading...
