AT-TQ5403 and AT-TQm5403 Access Points User’s Guide
59
Table 9. Basic Radio Settings Window
Field Description
Country Code Select the country code that applies to your
country or region. The country code ensures that
the device operates in compliance with the codes
and regulations of your region or country. Here
are the guidelines:
- You can select only one country.
- The Country Code parameter is shown in the
Basic Settings windows of all three radios but it
can only be set from Radio1.
- The same country code applies to all three
radios.
- Changing the country code disables the radios.
- You have to reconfigure the radio settings if
you change the country code.
- You cannot change the country code on units
sold in North America or Japan.
Status Activate or deactivate the radio. The selections in
the pull-down menu are described here:
- Enabled: Activates the radio.
- Disabled: Deactivates the radio. This is the
default setting.
Mode
(Radio1)
Select the communications protocol for Radio1
from the pull-down menu. The selections are
listed here:
- IEEE 802.11b/g: The access point accepts only
802.11b or 802.11g clients.
- IEEE 802.11b/g/n: The access point accepts
802.11b, 802.11g, or 802.11n clients operating
at 2.4GHz. This is the default for Radio1.
To Next Page
Loading...
