Allied Telesis AT-TQ5403 User Manual

AT-TQ5403 and AT-TQm5403 Access Points User’s Guide
105
ports into a static LAG.
 Disabled: Deactivates LAN2 port and the static LAG.
3. Click the SAVE & APPLY button to save and update your
configuration.
If you enabled the Static LAG parameter, the access point
automatically combines LAN1 and LAN2 ports into a static LAG. If you
disabled the feature, the access point disables the LAN2 port to block it
from forwarding traffic, and disables the static LAG.
4. If you enabled the LAN2 port, connect it to a network device, such as
an Ethernet switch or router. The access point begins forwarding and
receiving traffic on the port.

Allied Telesis AT-TQ5403 Specifications

General

Brand	Allied Telesis
Model	AT-TQ5403
Category	Wireless Access Point
Language	English