Allied Telesis AT-TQ5403 User Manual

AT-TQ5403 and AT-TQm5403 Access Points User’s Guide
131
4. Click the SAVE & APPLY button to save and update the configuration.
Log Relay Select one of the following:
- Enabled: Activates the syslog client to transmit
the event messages to your syslog server.
- Disabled: Deactivates the syslog client to stop
the access point from transmitting event
messages. This is the default.
Host Enter the IP address (for example, 10.10.1.200)
or host name (FQDN) of the syslog server. Here
are the guidelines:
- You can enter only one host.
- Do not include a subnet mask with IP address.
- The factory default is blank.
Observe these guidelines when using an FQDN
to identify the host:
- It cannot start or end with a hyphen.
- Domain labels can have a maximum of 63
characters.
- An FQDN can have up to 253 characters.
Port Enter the port number of the syslog server. The
range is 1 to 65535. The default is 514.
Table 27. Log Window for Syslog Client (Continued)
Field Description

Allied Telesis AT-TQ5403 Specifications

General

Brand	Allied Telesis
Model	AT-TQ5403
Category	Wireless Access Point
Language	English