AT-TQ5403 and AT-TQm5403 Access Point User’s Guide
75
6. Click the SAVE & APPLY button to save and update the configuration.
VLAN ID Enter a VID for the VAP. Here are the guidelines:
- The range is 1 to 4094.
- The default is VID 1.
- A VAP can have only one VID.
- You can assign the same VID to more than one
VAP.
- This VID is ignored for wireless clients receive
their VIDs from a RADIUS server for WPA
Enterprise security. VIDs from a RADIUS
server override the number in this field.
Hidden SSID Select whether the access point should advertise
the VAP SSID to clients. Here are the options:
- Disabled: The access point transmits the SSID
to advertise the VAP to clients. This is the
default setting.
- Enabled: The access point does not advertise
the VAP. Clients who want to connect to an
unauthorized VAP have to know its name.
MAC Filtering Select whether the VAP is to use the MAC filter to
control access by wireless clients. For
instructions, refer to “Configuring the MAC
Address List” on page 87. The options are listed
here:
- Enabled: The VAP uses the MAC filter to
control which wireless clients can connect to it.
When wireless clients connect to the VAP, the
access point compares their MAC addresses to
the addresses in the MAC filter and either
accepts or rejects the client traffic depending
on the filter settings.
- Disabled: The VAP does not use the MAC filter.
The MAC address filter requires that the Mode
setting be Access Point. You cannot use the MAC
filter on VAP0 in the WDS Parent or WDS Child
mode.
Table 12. Virtual Access Point Tab (Continued)
Field Description
To Next Page
Loading...
