Chapter 5: Virtual Access Points
88
2. From the Action pull-down menu, select one of the following:
Deny: Select this option to have the access point reject association
requests from wireless clients whose MAC addresses you enter in
the filter, and to accept association requests from all other clients.
This is the default setting.
Allow: Select this option to have the access point accept
association requests from the wireless clients whose MAC
addresses you enter in the filter, and to reject association requests
from all other clients.
3. To enter the MAC address of a wireless client the access point is to
deny or accept, click the MAC Address field and enter the address, in
this format xx:xx:xx:xx:xx:xx.
4. Click the Add button. You can enter only one address at a time. You
cannot enter broadcast or multicast addresses.
5. To remove addresses, do one of the following:
To delete MAC addresses individually, click the check boxes of the
addresses in the list and click the Delete button.
To delete all the addresses, click the check box to the right of the
MAC Address List title and click the Delete button
6. Click the SAVE & APPLY button to save and update the configuration.
To Next Page
Loading...
Need help?
General
